Shabby Chic Wooden Filing Cabinet

I found this beauty at a local Op Shop a couple of weeks back, and knew it would look fantastic keeping it simple and fresh with an Antique White shabby finish.

Unfortunately the keys are long gone but it is still a very functional and solid piece of furniture.

This is what it looks like inside - each drawer has a piece of timber attached to a thick wire at the base of the drawer, which it slides on, so no matter how few or many files in there, and they will remain standing.

I got to work removing the hardware...

A few years of grime under there!

I just used a fine knife to carefully prise the key plate and label holder up, so as not the damage the timber.

A light sand followed by a wash, and they were all good to prime and paint.

Here are the pieces I was working on last Friday, out on my driveway drying.  It often looks like this, and we currently live on quite a busy street.  The people driving past must wonder what on earth I am up to!

The black paint on the handles was quite sticky and shabby in not a good way so I opted to strip the paint off.

Probably a no-brainer but I always but the screws etc in a bag so I don't lose them or get them mixed up.  Sometimes I will label them, too, but this one was easy to work out which piece it belonged to because of the nameplates :)

Here it is all done and ready for sale in Piper & Rush.

I love those label holders!

Obviously it would be useful in a home office as a stylish alternative to a new filing cabinet, if you weren't worried about locking it.  I think it would also make a great side table or bedside cabinet...heaps of storage space in those big drawers!

Sharing at

Tutorial: How to turn your honeyed pine furniture into french willow grey

I've recently turned my attention to giving some honeyed pine stained furniture a lighter, fresher more updated look. I've called it 'french willow grey' because it reminds me of that lovely beige/grey colour of basket ware, but it's also the colour of driftwood, old rustic barn wood, and lovely old weathered fences...I'm sure you know what I mean :)
 I have done this look on quite a few pieces lately and I have to say, I love it!

First up, a huge, chunky honey-coloured pine coffee table that we bought to keep.  You might notice a peep of another table I have already finished.  I was going for the same look with this bigger one.

Next up is this even-more-yellow-than-honey-coloured pine pair of bedside cabinets.  For some bizarre reason, one the them is a tiny bit taller than the other.  I shouldn't think it would matter once they are on either side of a bed.

The technique I used for the coffee tables and the pine cabinets was pretty much the same.  I stripped back the polyurethane/varnish on the tops of the pieces.  For the largest coffee table I used my heat gun and it came off beautifully.  I wasn't so lucky with the other pieces however, and had to use paint stripper, which is far messier and time consuming.  

Once the tops were stripped I sanded them back to a nice even colour (sometimes the stripper stains a bit and sometimes the heat gun leaves burn marks). TIP: if there are any deep scratches you want to remove, lay a wet hot cloth over them for a minute or two this helps swell the wood and lifts out the scratch...saves lots of sanding!

Then I washed the pieces all over using sugar soap and water, then rinsed them and left them to dry.  Once dry I got to work painting them.  When I do the tops different, I like to leave them to last, because there is a bit more playing round with them to get just to effect I am after.  So I flipped my tables upside down, and primed, painted and distressed the legs.  I used a Dulux colour called Limed White, which is, despite how many white and neutrals paint chips I pick up, the one I keep gravitating to for the wall colour for our new home (one week to go, yippee!), so I wanted to try it out.  Have to say, I love it, in full strength, half strength and one quarter strength.  It is a really pretty neutral, just the perfect shade really! 

Sorry I haven't got any progress photos, but once the legs were done on the tables, and the 'bodies' of the bedside cabinets were all painted, I distressed them, then washed them down again to get rid of the dust, before sealing them with Cabothane water based poly (because I had used a low-sheen paint on them.  I float between waxing pieces and using poly on them, just a matter of preference for how to finish each piece, really.  Poly'ing them uses less physical energy than waxing, and since it is so hot here, I am all for sweating less at the moment! :)

Time for some photos before I explain how I did the tops...

The white you can see peeping through on the coffee table leg is the primer.  I like the white to peep through like that on most of my pieces.

I always paint the insides of cupboards... it is a bit of extra work but I want my pieces to look and feel fresh!

Ok, so how I get the tops to look like this:

I choose 3 or 4 colours in off-white/neutral/grey/beige/brown shades.  Test pots are perfect for this.  The colours I used here are all from Resene: Bison Hide, Triple Tea and Half Pravda.  The shot above shows the coffee table.  For the bedsides I also used some Barely There (a greyed white).

I start with the darkest colour and water it down quite a lot (the consistency would be more coloured water than runny paint).  I slap it on with a wide-ish brush, keeping my strokes straight and with the grain.  Because it is so runny, it pools a bit, that doesn't matter because it all adds to the effect once it dries.  Because I stripped the table top back to bare timber, I don't need (or want) to use primer, the paint will adhere perfectly well.  Once each coat is dry, I repeat again with the next lightest colour.  After I have done all the colours I want, I go back over with a couple of the colours, in random areas, not necessarily all over (more like dry brushing, but still with very watery paint).  Once all dry, and I am happy with how it looks, I very lightly sand over the whole top, which exposes the different (subtle) layers of colour, and a little of the wood grain.  Then a wipe down and finally 2 or 3 coats of poly, and you are done :)

This is the lounge room of our rental home, looking very bare in preparation for our move into our own home next week...bring it on!

Before and after: Union Jack Chair

My favourites of 2011

Hello, and welcome to 2012!  

I am thrilled that it is the start of a fresh new year, and I am very much looking forward to getting stuck into the projects that I have planned.  My baby starts school at the beginning of February, and while I am sure there will be tears (mine more than his!), I am excited about the new era that brings to his life, my life, and for our family dynamic in general.  It means I have 5 days a week to concentrate on my furniture (in between putting my mark on our new home, of course!)

Here is a bit of a roundup of my favourite makeovers of 2011...

I had to jump on the Union Jack bandwagon, here is my first attempt at it

And here is my second... I love them both!

I loved how the Shabby Chic Chicken Wire Hutch turned out:

This French Style Tallboy was a very satisfying transformation, made even sweeter by the fact that my client was so thrilled with it :)

The same lady commissioned me to do these French Style Chairs, and I loved how these turned out too!

This cute Hutch and Dining Suite just make me smile :)

And my absolute favourite project for the year, and the only one that I have kept for myself, are the Shabby Chic Retro Kitchen Chairs

they have already seen many happy family meals in our home, and I look forward to them seeing plenty more :)

Sharing this post at

xx Karen

Upcycled Industrial Style Stools

These babies spent the last maybe 40 years looking like this

Check out that excellent rust on the legs...I left that as is, it was just perfect.

I selected a taupe gingham oilcloth for the new upholstery, to give them a French flavour.
Orange just isn't my thing!

Here they are now

New white feet finished them off nicely.

There are four stools in total, and they are for sale right now at Piper and Rush, 3/106 William Street, Port Macquarie.

That round white table in the photos is also one of my recently completed projects, and is currently for sale in the shop.

This is what it looked like when I found it:

Well actually it wasn't upside down on my driveway covered in sugar soap, but you get the picture ;)

xx Karen